Connections (Charge, Remote Start, Preheating, Earth) - SDMO RES 9.5 EC Manuel D'installation

2.3.7.1. Connections (charge, remote start, preheating, earth)

1
Remove the cable router blanking cover.
3
Remove the circuit breaker cover.
5
2
Drill a hole in the cover (3 holes of the correct diameter for
the cable gland and cables).
Position the cable gland via the drill holes then refit the cover.
4
Feed the cables via the cable gland.
Connect the cables.
Figure 2.25: Electrical connections onsite
25/73