Preface - SDMO RES 9.5 EC Manuel D'installation

1. Preface

This manual explains how to install, use and maintain RES 9.5 EC and RES 13 EC equipped with ADC 2100 (Advanced Digital
Control) controllers, and RES 18 EC, RES 12 TEC and RES 16 TEC model generating sets equipped with ADC-RES (Advanced
Digital Control) controllers.
These generating sets are certified for use with natural gas or liquid propane (LP).
These generating sets are approved for use in fixed applications, in areas served by a reliable electric power grid. The generating
sets must be installed by an approved agent or maintenance technician. Refer to the "Instructions and safety regulations" document
for details of the safety instructions to be followed when installing, using and maintaining the generating set.
The information contained in this document is based on the latest information available at the time of printing.
SDMO Industries reserves the right to modify this document and any products referred to in this documentation without prior notice
and the company is not liable in any way for any of its content.
It is important to read this manual and to follow all the procedures and safety guidelines carefully, to guarantee that the equipment
operates optimally and to avoid any injuries. It is also important to read and follow the instructions in the "Instructions and safety
regulations" document. Keep this manual with the equipment so that it can be referred to as required.
This equipment requires careful maintenance to operate safely and effectively. Inspect the components on a regular basis and carry
out all necessary maintenance at the recommended intervals. Ensure that the equipment is kept in the best possible condition by
having maintenance work carried out by an approved distributor/retailer.
3/73