en
9.3.2
Routing the electric cables
Option of routing the cable through the rear wall or from below.
● Do not route the electric cable along hot surfaces or sharp edges!
Tension relief for
Energy optimization
connection (option)
9.4
Connect the appliance to the U-channel
Screw
U-washer
Panel
U-washer
44 / 92
the cable
Screw
Mains connection
terminal
Cable routing through the rear
wall - install edge protection in
the penetration!
Cable routing from below in
the side cable duct
Remove the covers
. Open the "top front cover" (Chapter 9.3.1).
. Depending on the type of appliance: Remove
"bottom front cover".
. Remove the screws.
. Remove the covers.