Routing The Electric Cables; Connect The Appliance To The U-Channel - Salvis ProfiLine 600 Mode D'emploi

9.3.2

Routing the electric cables

Option of routing the cable through the rear wall or from below.
● Do not route the electric cable along hot surfaces or sharp edges!
Tension relief for
Energy optimization
connection (option)
9.4

Connect the appliance to the U-channel

Screw
U-washer
Panel
U-washer
Screw
the cable
Mains connection
terminal
Cable routing through the rear
wall - install edge protection in
the penetration!
Cable routing from below in
the side cable duct
Remove the covers
. Open the "top front cover" (Chapter 9.3.1).
. Depending on the type of appliance: Remove
"bottom front cover".
. Remove the screws.
. Remove the covers.
en
31 / 52