Re-Connect The Electrical Connections Between Top And Base Units; Marking Of Cables/Components For Electrical Connections - Salvis VisionPro Série Notice De Montage

4.3 Re-connect the electrical connections between top and base
units
This work is only necessary if the top and base units were separated.
Check that no cables or hoses were trapped or damaged. Damaged cables or hoses must be
replaced immediately.
4.3.1

Marking of cables/components for electrical connections

Grouping: A group number is allocated for each connecting cable.
The marking is carried out at the factory.
Example for group numbering:
− Fries pan: 1 connecting cable = group 1
− Induction hob: 2 generators = group 2 and group 3
− Deep fat fryer: 2 connecting cables = group 4 and group 5
Observe the individual circuit diagrams for the installation modules!
Power supply for the installation modules
Already connec­
ted at the factory
42 / 72
Installing the connection between top and base units
Cable end is
marked
Terminal in the electrical installation com­
partment
- Group 1, 2, 3
Power supply connection for induction gene­
rator
- (Size 2)
Assambly instruction Cooking station