Initial Start-Up - FLUVO WK Notice D'utilisation

Table des Matières

Publicité

7
Operating the Centrifugal Pump
7.1

Initial Start-up

Important:
!
Prior to initially starting up the centrifugal pump please make sure that the
following prerequisites have been met:
1. The centrifugal pump has been connected properly electrically and with all requisite
safety features.
2. The centrifugal pump has been filled with delivery medium and has supply.
3. On the suction side all shut-off devices are open and the pump as well as the suction
pipe are vented.
4. Please observe: Running dry creates increased wear and must be avoided at all costs!
5. The rotating parts of the centrifugal pump have been covered by a protective shield. (In
accordance with UVV (Accident Prevention Regulations) the centrifugal pump may
only be operated if a safety shield has been fitted).
6. It has been checked that the centrifugal pump shaft rotates easily. Please observe the
instructions under 9.1.
7. The direction of rotation has been checked.
7.1.1
Start the centrifugal pump
Make sure that the shut-off device on the pressure end is half open before starting the
centrifugal pump up! Once the maximum rotation speed has been reached, slowly open it
up and adjust to full operational level.
102
Schmalenberger GmbH + Co. KG
D-72072 Tübingen / Germany
OPERATOR'S MANUAL
Pumpe Typ WK / WKN
Version: 27220 - A

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

WknWk 6013/2 - 1,5Wkn 6013/2 - 1,5Wk 6013/2 - 1,5 wsWkn 6013/2 - 1,5 wsWk 6013/2 - 1,9 ... Afficher tout

Table des Matières