Programming The Remote Control - ModelCraft GT3 2.4GHz Notice D'emploi



15. Programming the Remote Control

Your remote control system offers you the option to adjust the drive, steering and switching functions of your model to
your requirements and to permanently store the values you have determined. You will enjoy driving the model to the
maximum extent only if the model has been perfectly adjusted to your requirements.
The system is programmed using the clearly structured LC display (also see fig. 2, item 10) and 3 user-friendly func-
tion buttons below the display:
Enter Button (11):
With this button (also see fig. 2, item 11), you can call up the
programming menu, activate the different menu items and
store changed values.
ESC Button (12):
With this button (also see fig. 2, item 12), you can go back a
step within the programming menu, or leave the program-
ming menu.
Cursor Button (13):
Use this button (also see figure 2, item 13) to switch the
functions within a menu or to increase or reduce the indi-
Figure 18
vidual values.
The following setting functions are available for you via the programming menu:
• Selection of the Model Memory (MDL)
• Servo Reverse Function (REV)
• Servo End Point Adjustment (EPA)
• Servo Exponential Function (EXP)
• Setting the Brake Effect (ABS)
• Setting the Model Name (NAM)
• Setting the Digital Trim (TRM)
• Setting the Dual Rate Function (D/R)
54