Selection Of The Model Memory (Mdl) - ModelCraft GT3 2.4GHz Notice D'emploi

a) Selection of the Model Memory (MDL)
Your remote control system provides a total of ten different model memories in which you can store the individual
settings for ten different models. Alternatively, you can also set different values for one model and then save them
separately.
Activating a model memory
Switch on the transmitter. On the transmitter's LC display the operating dis-
play will appear.
Press the Enter button to enter the programming menu. The menu item for
model memory selection (MDL) is displayed.
Call the menu item via the Enter button. The display shows the currently ac-
tive model memory with its assigned model name.
Use the cursor button (right/left), you can now select the different model memo-
ries 0...9. With each press of the button, the display switches one memory
slot further.
When you have reached the desired memory position, save your selection by
pressing Enter. The display returns to the programming menu.
Use ESC to leave the programming menu again. The operating display now
indicates the model memory called.
MDL
MDL
NO.
MO 1
MDL
NO.
MO 3
NO. NO.
5.8
V
V
Figure 19
55