Publicité
N.B. Always put the blade in the bowl before adding ingredients.
• To remove, hold the central plastic stem of the blade and lift up and away from the centre spindle.
WARNING: Take great care when handling the blades; they are sharp and can cause injury.
Fitting and Removing the Work Bowl Cover
• Place the work bowl cover on top of the work bowl, with the feed tube just to the right of the
centre. Turn clockwise to lock onto the work bowl, ensuring the feed tube aligns with the handle
of the large work bowl.
• Align the pusher accessory with the feed tube opening on the work bowl cover and slide down
to the bottom.
• To remove the cover, grasp the feed tube and slide anti-clockwise to unlock and lift away.
CAUTION: the recommended time of use varies according to the accessory used and the type
of use:
Accessories
Large chopping blade (large bowl)
Large chopping blade (large bowl)
Small chopping blade (small bowl)
Small chopping blade (small bowl)
Slicing discs (large bowl)
D. MACHINE CONTROLS
High and Low Control Buttons
• The 'HIGH' or 'LOW' controls are buttons that allow the machine to run until 'OFF' is selected.
• Properly assemble the machine.
• Add ingredients to the work bowl, either through the feed tube or directly into the bowl. Ensure
the work bowl cover is correctly fi tted.
• Press the 'HIGH' or 'LOW' button. The blue LED light will illuminate and the motor will start.
• Press the 'OFF' button when fi nished.
WARNING: The unit has a built in safety mechanism which will automatically turn off the motor
if the work bowl cover is removed. If the 'OFF' button hasn't been pressed, when the work bowl
cover is replaced, the motor will start up automatically. Simply press the 'OFF' button to stop the
motor.
Pulse Button
The 'PULSE' control is a button that allows the machine to run only while it is being pressed. This
capability provides more accurate control of the duration and frequency of processing. Unless
otherwise specifi ed, a 'PULSE' should be about one second.
With the machine properly assembled, ingredients in the work bowl and the work bowl cover
correctly fi tted, press the 'PULSE' button repeatedly as needed. The blue LED High light will
illuminate upon activation. As you get used to using the processor you will get to know which
setting works best for the food you are using.
Types of use
Chopping (meat)
Kneading (paste)
Mixing (sauces, etc.)
Chopping (meat)
Kneading (paste)
Mixing (sauces, etc.)
Slicing, mincing
23
Time of use
Speed
1 minute
"HIGH"
3 minutes
"HIGH"
30 seconds
"HIGH"
3 minutes
"HIGH"
3 minutes
"HIGH"
Publicité
