Sony BVU-950 Manuel D'opération page 62

Time Counter Display
To display lap time
The time counter display shows the time period of tape travel or the lap time for
editing. It also displays the time of an IN or OUT point.
When edit points have been entered (see "Automatic Editing') and the IN or OUT
button pressed, the corresponding point will be displayed.
e After entering edit points, do not press the RESET button until you complete the
editing. If pressed, the entered edit points will be deleted.
While the LAP button is pressed after entering the IN and OUT points, the lap time
(the duration between the IN and OUT points) will be displayed on the time counter
display. When the RECORDER lamp lights, the lap time of the recorder is displayed,
and when the PLAYER lamp lights, the lap time of the player. When an OUT point is
entered on the player, not on the recorder, and preview or editing is performed, the
lap time entered on the player will be sent to the recorder and will be used as the lap
time for the recorder.
fs a
Lap time
Tape
a...
c 1 frame a
If all the necessary edit points have not been entered, the time in the table below will
be displayed.
Neither IN nor OUT
IN only IN point to the current tape position
Lap time of the last edit
OUT only Lap time of the last edit
58 (E)