Publicité
Les langues disponibles
Les langues disponibles
Notes for Recording
Preventing videohead clogging and possible tape damage
The BVU-950 can stay in the still or stop mode for a maximum
of eight minutes. *
After eight minutes,
the mode
will change as follows:
In the stop mode
The STANDBY
button goes out, the head drum stops rotating, and tension on the
tape is released. To start operating the unit, press any button except
for the STOP
button.
Press the STANDBY
button to put the unit in the stop mode
once more.
In the still mode
Tape starts running in the forward direction at 1/30 normal speed.
Condensation
on the head drum
The tape will not run when moisture condenses on the head drum. Condensation
occurs when there is a rapid change in temperature.
In this case, the AUTO
OFF
lamp lights up, the tape protector works, and the
BVU-950 will not operate. When
the power is turned on with a cassette being loaded,
the BVU-950 automatically ejects the cassette and the head drum starts rotating to
dry itself quickly. The BVU-950 is operative when the AUTO OFF lamp goes out.
e Because
it takes a few minutes for the condensation
detector to detect
condensation,
leave the BVU-950
unused
for at least ten minutes when
it is brought
into a warm room from a cold place.
Then turn the BVU-950 on. It can be operated as long as the AUTO
OFF
lamp does
not light.
If the AUTO OFF lamp lights, leave the power on and wait until the AUTO OFF
lamp goes out. When
the AUTO
OFF
lamp is lit, a cassette cannot
be inserted.
* This time period can be changed from the dial menu.
See "DIAL MENU
OPERATION"
and the maintenance
manual
for details.
30 (E)
Publicité
