Sony BVU-950 Manuel D'opération page 38

Starting Playback
Operation
To start playing back, proceed as follows:
1 Insert a cassette.
2 Press the PLAY button.
Playback starts and the PLAY button lights up.
When the servo-mechanisms are locked in, the SERVO lamp will also light up.
eo On
Insert a cassette.
e With the PLAY button pressed, the playback starts immediately. But, it takes a few
seconds for the servo-mechanisms to lock in, so the picture reproduced may be
broken up during this time.
To stop playing back
Press the STOP button.
Playback ends and the STOP button lights up.
Reproducing the time code
Install a BKU-905 time code generator/reader (optional) to reproduce and read the time
code. While the time code is being reproduced, the TIME CODE lamp lights.
Playing back with a time base corrector
Use a BKU-901 time base corrector (optional).
See the operation and maintenance manual supplied with the time base corrector.
34 (E)