Sony BVU-950 Manuel D'opération page 56

An example of split editing
a
AUDIO CH-1 AUDIO CH-2
pr INSERT
VIDEO
a !
' f
IN point
'
AUDIO CH-1 AUDIO CH-2
V
AUDIO CH-1
OUT point
Oz (E)
oo
c—> Buttons to be pressed
The VIDEO button is pressed and the
video signal is selected.
The AUTO EDIT button is pressed and
the tape runs.
The insertion of the video signal
starts from the IN point.
The AUDIO CH-1 and CH-2 buttons are
pressed and the insertion of the audio
signals on both channels starts.
The VIDEO button is pressed and the
insertion of the video signal ends.
The AUDIO CH-1 button is pressed and
the insertion of the audio signal on
the CH-1 ends.
The tape runs for two seconds past the
OUT point, then stops.
When the OUT point has not yet been
entered, press the ENTRY and OUT
buttons at the same time to stop.