Télécharger Imprimer la page

Sony BVU-950 Manuel D'opération page 65

Publicité

Les langues disponibles

Les langues disponibles

What
Can
Be Done with Basic Functions
There are five basic functions.
Each
is numbered
as listed in the table below.
101 TIME CODE
PRESET | Time code setting
00000000
102 U-BIT PRESET
User bit data setting
00000000
103 TITLE (SMALL)
Title characters recorded in small letters
OFF
104 TITLE (LARGE)
Title characters recorded in large letters
OFF
200 SETUP GRADE
Mode shift selection to execute the
BASIC
supplementary functions
e In the dial menu operation mode, each menu is superimposed on the video signal
output to a video monitor. Therefore, supply a video signal to the VIDEO IN
connector so that you can observe the menu on the monitor while the unit is in the
E-E mode.
To enter the dial menu operation mode
1 Press the STOP button to put the BVU-950 in the stop mode.
If a cassette is not inserted, skip this step.
2
Set the selectors below as follows:
TC/CTL/DIAL
MENU
selector: DIAL MENU
REMOTE/LOCAL
selector:
LOCAL
3
Push the search dial in and set it to the jog mode. *
The BVU-950
now goes into the dial menu
operation
mode
and one of the setup
items (101 to 219 as listed in the table) will be displayed on the monitor. * *
4 Turn the search dial while pressing the PLAYER/MENU
button.
Turn it clockwise and the higher numbered setup item appears on the monitor.
Turn it counterclockwise for the lower.
5 Stop the dial when the desired setup item is displayed and then release the
PLAYER/MENU
button. The desired setup item is selected. For operation with each
setup item, see the following sections.
For the dial menu operation, it is recommended to enter the E-E mode in order to
observe the menu on the monitor though it can also be observed in the playback
mode.
* The SHUTTLE/JOG
lamp does not light in the dial
menu operation mode.
But, if the search dial turns freely, you are operating in
the jog mode. If it does not, you are operating in the
shuttle mode.
* * Press only the PLAYER/MENU
button, not the search
dial, to display the function item number which is
currently selected on the time counter display.
61 (E)

Publicité

loading