Sony BVU-950 Manuel D'opération page 9

Optional Boards and Accessories
BKU-901 plug-in time base corrector
With an easy-to-install BKU-901 plug-in type board, the time base corrected signal will
be output. Connect the remote controller supplied with the BKU-901 to the TBC
REMOTE connector.
BKU-905 plug-in time code generator/reader
The BVU-950 is equipped with an address track head so that SMPTE time code can
be recorded or reproduced when a BKU-905 is installed.
BKU-906 remote control panel extension kit
The lower half of the front control panel of the BVU-950 can be removed for use as a
remote controller. This is for convenience when two BVU-950s are used.
It is easy to operate when used with a BK-803 control panel case.
BK-803 control panel case
This is for easy operation of the front control panel when used as a remote controller.
RMM-950 rack mount kit
This is an EIA standard 19-inch rack for the BVU-950.
RMM-501 type-5 rack mount kit
Use this to install the BVU-950 in a Sony system console (optional).
For more details, see the instructions supplied with each unit.