Sony BVU-950 Manuel D'opération page 69

Menu of 104 TITLE (LARGE)
fi. a
SET TCP@ TLP@ LD ST ——+—Command menu
ABCDEFGHIJKLMNOPQRST ~
UVWXYZ61 23456789 4~ Character menu
()O1?+ 44e54+-X¥/=8.1
| |-——t-= Title set area
Ke J
4 Turn the search dial so that the TLPO command blinks. Then set the position on
the display for the characters. See '"'How to use commands" on page 66 to set.
5 While pressing the RECORDER/DATA button, turn the search dial to set the
position to display the first character in the title set area. Skip this step to set
from the beginning.
6 Turn the search dial so that the desired character blinks. Then press the SET
button.
The blinking character will be placed in the title set area.
Repeat this procedure to set the complete title.
e The number of characters that can be placed is limited to the maximum for the title
set area.
7 When all the characters required are set, turn the search dial so that the SET
command blinks, and then press the SET button.
The title will be displayed in the title set area determined in step 5.
65 (E)