Publicité
Les langues disponibles
Les langues disponibles
Stop light (fig. 73)
To replace the stop and parking light bulbs, unscrew the
two screws (1) that secure the cover (2). The cover (2) has
two retaining pins on the inner face that hold the tail light
lens (3) in place. Remove the cover (2) from its seat and
remove the tail light lens (3). The bulb is of the bayonet-
type: press and twist counter-clockwise to remove.
Change the bulb and refit by pressing and turning
clockwise until it locates into its seat with an audible click.
Refit any parts you have removed.
E
Number plate light (fig. 74)
To expose the number plate light bulb, unscrew the two
retaining screws (4) securing the cover (5). Extract the
bulb and replace.
76
3
2
5
3
1
4
fig. 73
fig. 74
Publicité
