Right switch (fig. 21)
1) Switch for ENGINE STOP, two positions:
position
(RUN) = run;
position
(OFF) = stop engine.
Warning
This switch is mainly intended for use in emergency
cases when you need to stop the engine quickly.
E
After stopping the engine, return the switch to the
position to enable starting.
Important
Riding with the lights on, stopping the engine using
switch (1) and leaving the ignition key in the ON position,
may run the battery flat as the lights will remain on.
2) Button
= engine start.
Throttle twistgrip (fig. 21)
The twistgrip (3) on the right handlebar opens the throttles.
When released, it will spring back to the initial position
(idling speed).
28
1
3
2
fig. 21