Publicité
Les langues disponibles
Les langues disponibles
Front turn indicators (fig. 71)
Notes
The rear-view mirror and incorporated turn indicator
are shown detached from the headlamp fairing to simplify
illustration.
Remove the screws (1) and detach the glass (2) from the
indicator/mirror support.
The bulb is of the bayonet-type: press and twist counter-
clockwise to remove. Change the bulb and refit by
pressing and turning clockwise until it locates into its seat
with an audible click. Refit the glass into the suitable slot
in the indicator body so that their profiles coincide.
and tighten the screws (1).
Rear turn indicators (fig. 72)
To change the rear turn indicator bulbs, rotate indicator
body (3) by one fourth of a turn so that glass is upward and
extract it from indicator mount.
The bulb is of the bayonet-type: press and twist counter-
clockwise to remove. Change the bulb and refit by
pressing and turning clockwise until it locates into its seat
with an audible click. Refit indicator body (3) to its mount
and rotate by one fourth of a turn.
1
3
2
E
fig. 71
fig. 72
75
Publicité
