Publicité
Les langues disponibles
Les langues disponibles
Gearchange pedal adjustment (fig. 26)
Gear change pedal position relative to the footpeg may
be adjusted to suit rider preferences.
There are three different adjustments available:
Approximate adjustment of pedal position
2
Fit a wrench into the socket (1) to lock out removable
linkage rotation and slacken the locknut (3). Release and
remove the screw (2) and adjust the linkage axially so as
E
to set the gear change pedal in the desired position.
The linkage has four positions determined by the axis of
the screw (2). After adjustment, torque screw (2) to 8 Nm
1
3
and locknut (3) to 10 Nm.
fig. 26
Fine adjustment
Fit a wrench into the socket (1) to lock out removable
linkage rotation and slacken the locknut (3). Rotate the
linkage working the socket (1) so as to set pedal in the
desired position. When finished, torque locknut (3) to
10 Nm.
Combined adjustment
Both adjustment techniques may be used together.
Make sure to torque locknut (3) to 10 Nm and screw (2) to
8 Nm when finished.
32
Publicité
