Publicité
Les langues disponibles
Les langues disponibles
Seat and helmet compartment lock (two-seater)
Opening (fig. 32 and fig. 33)
Insert the key into the seat lock (1) and turn it clockwise
until the seat hook disengages with an audible click.
Slightly raise the rear of the seat (2) and lift it upwards until
it can be extracted.
The helmet cable is in the front part of the underseat
compartment. Pass the cable (A) through the helmet
E
and fit the ends of the cable into the hook. Leave the
helmet (fig. 33) hanging and refit the seat to secure it.
Warning
This device protects the helmet against theft when
the motorcycle is parked. Do not leave the helmet
attached in this way when riding the motorcycle as it
can interfere with riding and cause loss of control of
the motorcycle.
The cable should be passed under the subframe from the
LH side. In any other position the cable will interfere with
the seat closure.
38
0
2
1
1
A
0
1
fig. 32
fig. 33
Publicité
