Publicité
Les langues disponibles
Les langues disponibles
If you wish to set steering head angle at 23° 30', match
the last hole at the front end of the steering lock peg (3)
with the mounting hole in the steering head. Apply
medium-strength threadlocker to the screw (2) and
use the screw to secure the steering damper, after
installing the steering lock peg (3).
Rotate the ball joint (A) of the steering damper rod
through 180°. Apply medium-strength threadlocker to
the screw (1) you have removed previously and secure
the steering damper with the screw.
E
Grease the previously loosened screw (4) and torque to
23 Nm ± 5%.
A
1
fig. 65
69
Publicité
