Publicité
Les langues disponibles
Les langues disponibles
Lap time recording (fig. 10 and fig. 11)
This function lets you record lap time and displays top
speed and engine rpm during that lap.
Select the LAP indication in the display (4, fig. 10).
Press the engine start button (5, fig. 11) while riding to
start the on-board chronometer. Pressing the button (5)
again will stop the chronometer and the same time
re-starts to record the second lap time. A maximum of
up to 19 lap times can be recorded. If a greater number
of laps is memorised, the earlier lap times are deleted -
only the last 19 are memorised.
Notes
In the LAP mode, the engine may not be started
using the starter button (5).
Memorised lap time display (fig. 10)
After measuring lap times, up to 19 times may be retrieved
and displayed on the LCD. Once the engine is turned off,
press the button (2, fig.10) and turn the key from OFF to
ON to use this function. Once this function has been
accessed, press the button (1, fig. 10) to scroll through
recorded times. The instrument panel provides the
following information:
- Lap number (6);
- Top engine rpm (7, fig.10) during selected lap;
- Lap time (4, fig.10);
- Top speed (8, fig.10) during that lap.
1
8
4
7
2
6
fig. 10
5
fig. 11
17
E
Publicité
