Adjusting the throttle cable tension
The throttle twistgrip must have a free play of 1.5 - 2 mm
measured at the edge of the twistgrip, at all positions
of the handlebars. If needed, adjust using the adjusters
(1 and 2, fig. 61) located on the steering tube on the left
side of the motorcycle.
The adjuster (1) is for throttle opening, whereas adjuster
(2) is for throttle closing.
Slip off the dust covers of the adjusters and slacken the
locknuts. Work the adjusters as follows: turn clockwise to
E
increase play, anti-clockwise to decrease play. When
finished, tighten the locknuts and refit the dust covers.
66
1,5÷2 mm
2
1,5÷2 mm
fig. 60
1
fig. 61