Publicité
Les langues disponibles
Les langues disponibles
Warning lights brilliancy
Warning lights brilliancy is automatically adjusted by the
instrument panel depending on the quantity of outer light
detected.
Backlighting
Instrument panel backlighting is on only if the parking
lights or the low/high beams are turned on.
In this case the instrument panel, thanks to some sensors
measuring ambient temperature and light intensity,
can automatically turn the backlighting on or off.
Lights self-disabling
This function allows a lower voltage consumption from
the battery, by automatically switching off the headlight.
The device is triggered in two cases:
- in the first case, if you turn the key from OFF to ON and
do not start the engine, within 60 Sec. the headlight is
turned off and will be turned on again only at next key
OFF/ key ON.
- in the second case, after the daily use of the
vehicle with the lights on, if the engine is killed via
the RUN- STOP button on the RH switch.
In this case, after 60 Sec. from engine killing,
the headlight will be turned off and will be turned
on again only upon next engine starting.
Notes
When the engine is started, the system turns off the
headlights and only turns them back on again when the
engine has started or when the starter button is released
(2, fig. 21).
E
19
Publicité
