Publicité
Les langues disponibles
Les langues disponibles
MAIN MAINTENANCE OPERATIONS
Removing the fairing
Some servicing operations need the motorcycle fairing to
be removed.
Warning
E
Firmly and properly secure all removed parts when
refitting them, otherwise some of them might suddenly
come off when riding and you may lose control of your
motorcycle.
Important
At reassembly always fit nylon washers when
tightening fastening screws, not to damage painted
parts and Plexiglas headlamp fairing.
Side fairings (two-seater version) (749/749S/749Dark)
Remove the side fairings with the allen key in the
underseat compartment by undoing:
the two quick fasteners (1) securing the body panels to the
brackets;
the two quick fasteners (2) securing the body panels to the
headlamp fairing;
the two quick fasteners (3) securing the body panels to the
headlamp fairing;
the screw (4) joining the right and left body panels at the
bottom end.
58
Side fairings (single-seater version) (749 - 749S)
Remove the body panels as follows: Remove the four
quick fasteners (3) with their ring securing the body panels
to the frame.
On the right-hand side, gain access to the tool kit, take the
Allen key for the fairing and remove the following:
the two quick fasteners (1) securing the body panels to the
brackets;
the two quick fasteners (2) securing the body panels to the
headlamp fairing;
the screw (4) joining the right and left body panels at the
bottom end.
2
3
4
fig. 50
1
Publicité
