Publicité
Les langues disponibles
Les langues disponibles
2) Move the cold start lever to (B, fig. 45).
3) Check that the stop switch (1, fig. 46) is positioned
to
(RUN), then press the starter button (3, fig. 46).
This model features servo-assisted starting. Press and
immediately release the start button (3) to use the servo-
assisted engine starting function. When you press the
button (3) the starter motor operates automatically for a
MAX time determined by engine temperature. The system
disengages the starter motor as soon as the engine starts.
If the engine fails to start, wait at least 2 seconds before
E
pressing the start button (3) again.
Allow the engine to start without turning the throttle
twistgrip.
Notes
If the battery is flat the system automatically
disables operation of the starter motor.
4) Slowly move the cold start lever (1) to its vertical
position (A, fig. 45).
Important
Do not rev up the engine when it is cold. Allow some
time for the oil to warm up and reach all points that need
lubricating.
52
A
B
1
fig. 45
2
3
fig. 46
Publicité
