Publicité
KICK SHAFT AND SHIFT SHAFT
Shift shaft
1. Install:
NOTE:
Apply the engine oil on the roller and shift
shaft.
2. Install:
NOTE:
When installing the shift pedal onto the shift
shaft, be sure that the center of the shift pedal
is about 1 mm (0.04 in) a above the top of the
footrest.
Kick shaft assembly
1. Install:
NOTE:
Apply the molybdenum disulfide oil on the
G
inner circumferences of the kick gear and
ratchet wheel.
Align the punch mark a on the ratchet wheel
G
with the punch mark b on the kick shaft.
2. Install:
NOTE:
Make sure the stopper a of the torsion spring
fits into the hole b on the kick shaft.
4 - 76
Roller 1
G
Collar 2
G
Torsion spring 3
G
Shift shaft 4
G
Shift pedal 1
G
Bolt (shift pedal) 2
G
12 Nm (1.2 m · kg, 8.7 ft · lb)
Kick gear 1
G
Washer 2
G
Circlip 3
G
Ratchet wheel 4
G
Spring 5
G
Washer 6
G
Circlip 7
G
To kick shaft 8.
Torsion spring 1
G
To kick shaft 2.
ENG
Publicité
