Télécharger Imprimer la page

Yamaha YZ250F Manuel D'atelier Du Proprietaire page 142

Publicité

EC240000
CABLE ROUTING DIAGRAM
1 Fuel tank breather hose
2 Clutch cable
3 Oil tank breather hose
4 Hot starter cable
5 Cylinder head breather hose
6 Cable guide
7 Hose guide
8 Brake hose
9 Engine stop switch lead
0 Clamp
A Sub-wire harness
B Throttle position sensor lead
C Neutral switch lead
D Oil hose
E CDI magneto lead
F Radiator breather hose
G Carburetor breather hose
H Carburetor overflow hose
CABLE ROUTING DIAGRAM
Å Pass the fuel tank breather hose
between the handlebar and ten-
sion bar, then insert its end into
the hole of the number plate.
ı Pass the hot starter cable
between
the
cylinder
breather hose, oil tank breather
hose and ignition coil, then on
the outside of the left engine
bracket.
Ç Pass the clutch cable through
the cable guides.
Î Pass the clutch cable in front of
the radiator mounting boss.
‰ Fit the brake hose into the
guides on the protector.
2 - 18
SPEC
Ï Fasten the neutral switch lead
and CDI magneto lead to the
cable guide with a plastic locking
tie and cut off the tie end.
Ì Fasten the engine stop switch
head
lead, neutral switch lead and
CDI magneto lead.
Ó Fasten the engine stop switch
lead and sub-wire harness.
È Fasten the sub-wire harness
and hot starter cable at the white
tape for the sub-wire harness.
Ô Fasten the sub-wire harness.
 Pass
the
sub-wire
between the engine brackets.
harness

Publicité

loading

Ce manuel est également adapté pour:

Yz250fr