Publicité
ENGINE OIL REPLACEMENT
7. If the oil filter is to be replaced during this
oil change, remove the following parts
and reinstall them.
Replacement steps:
Remove the oil filter element cover 1 and
G
oil filter element 2.
Check the O-rings 3, if cracked or dam-
G
aged, replace them with a new one.
Install the oil filter element and oil filter ele-
G
ment cover.
8. Install:
G
G
G
G
G
G
9. Install:
G
G
G
G
10. Fill:
G
11. Check:
G
12. Install:
G
13. Check:
G
3 - 16
INSP
ADJ
Oil filter element cover:
10 Nm (1.0 m • kg, 7.2 ft • lb)
Copper washer 1
Oil strainer (frame) 2
70 Nm (7.0 m · kg, 50 ft · lb)
Oil hose 3
Bolt (oil hose) 4
10 Nm (1.0 m · kg, 7.2 ft · lb)
Oil hose clamp 5
2 Nm (0.2 m · kg, 1.4 ft · lb)
Lower engine bracket
10 Nm (1.0 m · kg, 7.2 ft · lb)
Copper washer
Oil filter element drain bolt
10 Nm (1.0 m · kg, 7.2 ft · lb)
Crankcase oil drain bolt
20 Nm (2.0 m · kg, 14 ft · lb)
Frame oil drain bolt
23 Nm (2.3 m · kg, 17 ft · lb)
Engine oil
Oil quantity:
Total amount:
1.2 L (1.06 Imp qt, 1.27 US qt)
Periodic oil change:
1.0 L (0.88 Imp qt, 1.06 US qt)
With oil filter replacement:
1.1 L (0.97 Imp qt, 1.27 US qt)
Oil leakage
Oil tank cap
Engine oil level
Publicité
