Publicité
SPECIAL TOOLS
The proper special tools are necessary for complete and accurate tune-up and assembly. Using the
correct special tool will help prevent damage caused by the use of improper tools or improvised
techniques. The shape and part number used for the special tool differ by country, so two types are
provided. Refer to the list provided to avoid errors when placing an order.
NOTE:
For U.S.A. and Canada, use part number starting with "YM-", "YU-" or "ACC-".
G
For others, use part number starting with "90890-".
G
Part number
YU-1135-A, 90890-01135
YM-1189, 90890-01189
YU-1235, 90890-01235
YU-3097, 90890-01252
YU-1256
YU-90050, 90890-01274
YU-90050, 90890-01275
YU-91044, 90890-04081
YU-90063, 90890-01278
YU-1304, 90890-01304
YU-24460-01, 90890-01325
YU-33984, 90890-01352
Tool name/How to use
Crankcase separating tool
These tool is used to remove the crankshaft from
either case.
Flywheel puller
This tool is used to remove the flywheel magneto.
Rotor holding tool
This tool is used when loosening or tightening the fly-
wheel magneto securing nut.
Dial gauge and stand
Stand
These tools are used to check each part for runout or
bent.
Crankshaft installing tool
Crankshaft installing pot
Crankshaft installing bolt
Spacer (crankshaft installer)
Adapter (M12)
These tools are used to install the crankshaft.
Piston pin puller set
This tool is used to remove the piston pin.
Radiator cap tester
Radiator cap tester adapter
These tools are used for checking the cooling sys-
tem.
SPECIAL TOOLS
YU-1135-A
YM-1189
YU-1235
YU-3097
YU-1256
YU-90050
YU-90063
YU-91044
YU-1304
YU-24460-01
YU-33984
1 - 7
GEN
INFO
Illustration
90890-01135
90890-01189
90890-01235
90890-01252
90890-01274
90890-01275
90890-01278
90890-04081
90890-01304
90890-01325
90890-01352
Publicité
