Publicité
BALANCE
Left/right BALANCE distribution. Settings: L9
(left) to R9(right).
Turn
tuning button
Press
tuning button
FADER
Front/Rear FADER distribution. Settings: F9
(front） to R9(rear).
Turn
tuning button
Press
tuning button
LOUDNESS
Increase of bass at low volume. Settings: ON, OFF.
Turn
tuning button
Press
tuning button
PRESET EQ (sound profile)
Selecting equalizer presettings. Settings:
POP, ROCK, CLAS (classic), OFF (no presetting).
Turn
tuning button
Press
tuning button
SUB-OUT
Setting the level and frequency of the preamplier
output.
Turn
tuning button
the following menu items:
– FREQUENCY (settings: 80/120/160 Hz)
– GAIN (settings: 0 to +7)
Press the rotary control to change the
setting for the selected menu item.
Turn the rotary control to set the level or
frequency.
Press the rotary control to confirm the
setting.
AMP DELAY
Setting the delay with which a connect amplifier
is switched in. Settings: 0.5/1.0/1.5/2.0/2.5
seconds and OFF (no delay).
Turn
tuning button
Press
tuning button
20
DURBAN224 DAB BT
to change the settings.
to confirm the setting.
to change the settings.
to confirm the setting.
to change the settings.
to confirm the setting.
to change the settings.
to confirm the setting.
to change between
to change the settings.
to confirm the setting.
Setting the 3-band equaliser
The radio features a 3-band equaliser. For each of
the three treble, middle and bass bands, you can
select a frequency as well as adjust the level. In ad-
dition, you can adjust the quality factor for bass
and middle. The equaliser also provides an adjust-
able increase of the bass at low volume (X-bass).
Opening the "EQUALIZER" menu
In the "AUDIO" menu, select the "EQUALIZER"
menu item.
Press tuning button to open the menu.
Turn tuning button to change between
the following menu items:
– EQUALIZER
– EQ TREBLE
– EQ MIDDLE
– EQ BASS
– EQ X-BASS
Note:
The submenus in the "EQUALIZER" menu are not
automatically exited after the last key has been
activated. After the setting, press the MENU
button to exit the menu.
EQUALIZER
Switching the equalizer on or off . Settings:
ON, OFF.
Turn
tuning button
to change the settings.
Press
tuning button
to confirm the setting.
EQ TREBLE
Adjusting treble frequency and level of the equalizer.
Press tuning button to open the menu.
Turn the rotary control to change between
the following menu items:
– FREQUENCY (settings: 10/12.5/15/17.5 kHz)
– GAIN (settings: –7 to +7)
Press tuning button to change the setting
for the selected menu item.
Turn tuning button to set the level or
frequency.
Press tuning button to confirm the setting.
EQ MIDDLE
Adjusting centre frequency and level of the
equalizer.
Settings
20
22.05.19 17:00
Publicité
