Publicité
Bluetooth | Front Microphone | Settings
Bluetooth | Front Microphone | Settings
Turn tuning button to set the level adjust-
Turn tuning button to set the level adjust-
ment.
ment.
Press tuning button to confirm the setting.
Press tuning button to confirm the setting.
Front Microphone
Front Microphone
Connect the microphone to MIC jack and pess
Connect the microphone to MIC jack and pess
MIC button to MIC mode.
MIC button to MIC mode.
• Connect a microphones to the MIC jack to
• Connect a microphones to the MIC jack to
verify that sound is output from the car
verify that sound is output from the car
audio system.
audio system.
Check that all the cords are fully inserted
Check that all the cords are fully inserted
into the jacks on both the receiver and the
into the jacks on both the receiver and the
equipment.
equipment.
Check the connection of the speaker which
Check the connection of the speaker which
is not outputting any sound.
is not outputting any sound.
There is no sound from a specific equipment.
There is no sound from a specific equipment.
• Check that the equipment is connected correctly
• Check that the equipment is connected correctly
to the audio input jacks for that equipment.
to the audio input jacks for that equipment.
• Check that the cord(s) used for the connection
• Check that the cord(s) used for the connection
connection is (are) fully inserted into the jacks
connection is (are) fully inserted into the jacks
on both the receiver and the equipment.
on both the receiver and the equipment.
There is severe hum or noise.
There is severe hum or noise.
• Check that the speakers and equipment are
• Check that the speakers and equipment are
connected securely.
connected securely.
• Check that the connecting cords are away
• Check that the connecting cords are away
from a transformer or motor.
from a transformer or motor.
• The plugs and jacks are dirty. Wipe them
• The plugs and jacks are dirty. Wipe them
with a cloth slightly moistened with alcohol.
with a cloth slightly moistened with alcohol.
External audio sources
External audio sources
Front AUX-IN socket
Front AUX-IN socket
Danger!
Danger!
Increased risk of injury
Increased risk of injury
from connector.
from connector.
In case of an accident, the protruding
In case of an accident, the protruding
connector in the front AUX-IN socket may
connector in the front AUX-IN socket may
cause injuries. The use of straight plugs or
cause injuries. The use of straight plugs or
adapters leads to an increased risk of injury.
adapters leads to an increased risk of injury.
For this rearson, it is recommended to use
For this rearson, it is recommended to use
angled jack plugs.
angled jack plugs.
As soon as an external audio source, such as a
As soon as an external audio source, such as a
portable MP3 player is connected to the front
portable MP3 player is connected to the front
AUX-IN socket; , it can be selected with the
AUX-IN socket; , it can be selected with the
SRC button @ . "AUX" then appears on the
SRC button @ . "AUX" then appears on the
display.
display.
19
DURBAN224 DAB BT
Sound settings
Sound settings
The following sound settings can be changed inthe
The following sound settings can be changed inthe
"AUDIO" menu:
"AUDIO" menu:
• Adjusting bass and treble
• Adjusting bass and treble
• Setting the left/right volume distribution
• Setting the left/right volume distribution
(Balance) or front/rear (Fader)
(Balance) or front/rear (Fader)
• Adjusting the increase of bass at low volume
• Adjusting the increase of bass at low volume
(Loudness)
(Loudness)
• Selecting a sound profile
• Selecting a sound profile
• Selecting level and frequency of the preamplifier
• Selecting level and frequency of the preamplifier
output(Sub-Out).
output(Sub-Out).
• Adjusting the time delay for switching in an
• Adjusting the time delay for switching in an
external amplifier.
external amplifier.
• Setting the 3-band equaliser
• Setting the 3-band equaliser
Calling and exiting the "AUDIO"
Calling and exiting the "AUDIO"
menu
menu
Breifly press the MENU button to open the user
Breifly press the MENU button to open the user
menu.
menu.
Turn the tuning button until the "AUDIO" menu item
Turn the tuning button until the "AUDIO" menu item
is selected.
is selected.
Press tuning button to open the "AUDIO" menu.
Press tuning button to open the "AUDIO" menu.
Turn tuning button until the desired menu item is
Turn tuning button until the desired menu item is
selected.
selected.
Perform the setting (see the next section).
Perform the setting (see the next section).
Breifly press the MENU button to exit the menu.
Breifly press the MENU button to exit the menu.
Notes:
Notes:
• The menu is automatically exited approx. 15 s
• The menu is automatically exited approx. 15 s
econds after the last button activation and you
econds after the last button activation and you
are returned to the display of the current audio
are returned to the display of the current audio
source.
source.
• To go back to the next higher-level menu, turn
• To go back to the next higher-level menu, turn
tuning button until the "<<<" option is selected
tuning button until the "<<<" option is selected
and press the rotary control.
and press the rotary control.
Making settings in the "AUDIO" menu
Making settings in the "AUDIO" menu
BASS
BASS
Bass level. Settings: –7 to +7.
Bass level. Settings: –7 to +7.
Turn
Turn
tuning button
tuning button
to change the settings.
Press
Press
tuning button
tuning button
to confirm the setting.
TREBLE
TREBLE
Treble level. Settings: –7 to +7.
Treble level. Settings: –7 to +7.
Turn
Turn
tuning button
tuning button
to change the settings.
Press
Press
tuning button
tuning button
to confirm the setting.
to change the settings.
to confirm the setting.
to change the settings.
to confirm the setting.
19
22.05.19 17:00
Publicité
