WARNING!
If despite these recommendations
you are not able to correctly index
your gears, see your local retailer so
they can carry out the different steps
of adjustment as well as checking the
derailleur hanger.
next cog, or if it makes noise from rubbing onto the lower cog, you need to tighten the cable
by unscrewing the dial.
Inversely if the derailleur takes the chain too far, climbing up two cogs or rubbing on the upper
cog, you need to loosen the cable by tightening the dial.
The final adjustment to cut out all noise should be precise and the dial adjusted by a quarter
turn between each check.
4.4 SUSPENSIONS
For optimal durability and functioning, check the
specific notices of each manufacturer delivered with
this manual in order to correctly carry out the settings
and maintenance of components. Also ensure you
adapt the settings to your size and your type of riding.
4.4.1 FORK LOCKOUT SYSTEM
Some forks are equipped with a system to lockout
the suspension. Each brand has its own type of
lockout but the principle remains very similar from
one brand to another. When the system is locked, the
fork movements are blocked in order to guarantee
better pedaling efficiency. However, the fork is not
100% blocked in order not to damage the suspension if the fork stays locked out on rough
ground. The levers are on the right leg of the fork. The following figure presents different models
of lockout systems.
Figure 18. Different systems of fork lockouts
FR
EN
changing lever is set to the highest gear, which
corresponds to the smallest cog. Then tighten the
cable by pulling on it and immobilize it by using the
cable tightener on the derailleur.
To perfect the cable tension, use the dial on the
derailleur or on the lever.
When pressing on the lever to change up the
gears, the derailleur should climb without delay
onto the next cog without making any noise.
If the derailleur does not pull the chain onto the
WARNING!
A badly carried out setting
can make you lose control of
your Moustache or damage
components. Ask your local
retailer for advice. He/she has
the necessary experience
to help you find the correct
settings. You can also refer to
the manufacturer's notice.
DE
IT
ES
71
NL