Identification Data; Device Identification Label; Handpiece Identification Data - Mectron PIEZOSURGERY WHITE Mode D'emploi Et D'entretien

2 IDENTIFICATION DATA
A precise description of the model and device
serial number will facilitate the After-Sales
Service to answer the inquiries quickly and
effectively.
2.1 Device Identification Label
Every device has an identification
label that reports the main technical
characteristics and the serial number.
The identification label is located under
the device. The complete technical
specifications are reported in
on page 28 .
A separate label shows further symbols
and characteristics of the device. This
identification label is placed under the
device.
NOTE: The complete list of symbols and
their description are shown in
1.5 on page 6.
2.2 Handpiece Identification Data
Each handpiece is laser-marked with (refer to
Figure 1 at page 9):
• its serial number (SN);
• its product number (REF);
• its date of manufacturing;
• the device name (PIEZOSURGERY®
white);
• the Mectron logo;
• HIBC 128 Data Matrix;
• CE, MD, Applied Part and Sterilizable
symbols.
8
Always
contacting an Authorised Mectron Service
Centre.
Chapter 8
Chapter
NOTE: The complete list of symbols and their
description are shown in
6.
provide this information
manufacturer
Mectron S.p.A.
Via Loreto 15/A
16042 Carasco -GE- Italy
PIEZOSURGERY white
~
100-240 V 120 VA - 50/60 Hz.
00000000
YYYY-MM-DD
415000000
HIBC 128 Bar Code
PIEZOSURGERY white
Device for intermittent operation:
60 s ON - 30 s OFF with irrigation
30 s ON - 120 s OFF without irrigation (ENDO,
PERIO)
Chapter 1.5 on page
when
0051
made in Italy