Identification Data; Equipment Identification Plate; Testing; Testing Of The Equipment - Mectron easyjet pro Notice D'utilisation Et D'entretien

01.0 Identification data

01.1 Identification data
An exact description of the model including the serial number of the equipment will make it easier for our
After-Sale Service to respond quickly and efficiently to your queries.
Always provide the above information whenever you contact a Mectron Service Centre.

01.2 Equipment identification plate

Each device has an individual serial number (Fig.1 - Ref.A). All the remaining data are contained in this
manual (see section "11.0").
A
Fig. 1

02.0 Testing

02.1 Testing of the equipment

All equipment manufactured by MECTRON is thoroughly checked and tested, including all components.
During the testing procedure the components are subjected to a number of work cycles.
The tests highlight any malfunctioning due to faulty components.
This procedure ensures proper functioning and reliability of all components.

03.0 Delivery

03.1 Delivery of the apparatus

The equipment contains electronic components that may be damaged by impacts even inside the
packaging. Special care must therefore be taken for both transport and storage.
In order to avoid crushing, do not place cartons on top of one.
All material shipped by MECTRON is checked at the time of shipment.
The equipment is delivered properly protected and packaged.
At the time of receipt of the equipment check it for possible transport damage. If any damage is found,
make a complaint to the carrier.
24
easyjet pro - manual of use and maintenance