Delivery; List Of The Components Of The Piezosurgery® White - Mectron PIEZOSURGERY WHITE Mode D'emploi Et D'entretien

3

DELIVERY

3.1 List of the Components of the
PIEZOSURGERY® white
Refer to the front endpaper.
PIEZOSURGERY® white consists of:
A. Device core system;
B. Peristaltic pump;
C. Foot Pedal with cable and connector;
D. Power Cord;
E. PIEZOSURGERY® white handpiece fixed
holder;
F. Irrigation bag support rod;
G. Peristaltic pump tubing;
H. Use and Maintenance Manual, Cleaning
and Sterilization Manual;
I. K8 Mectron torque wrench;
CAUTION: Some inserts require specific
accessories and tools for being correctly
used (for example kits and / or dedicated
torque wrenches). Always read and follow the
assembly and cleaning instructions supplied
with the insert.
J. Case.
Available accessories:
• PIEZOSURGERY® white handpiece
complete with cord - Ref. K (produced
by Mectron);
• Compatible PIEZOSURGERY®
handpieces (produced by Mectron);
CAUTION: The handpiece and the cord
cannot be separated.
• Compatible inserts and insert kits - Ref. L
(produced by Mectron);
• Compatible Mectron torque wrenches
(produced by Mectron);
• Touch keyboard protective film - Ref. M
(distributed by Mectron);
• Bone grafting kit - Ref. N (distributed by
Mectron);
• PIEZOSURGERY® irrigation set - Ref. O
10
(distributed by Mectron);
• Inserts holder (distributed by Mectron);
• Surgical tray - small (distributed by
Mectron);
NOTE: Refer to the MECTRON website for the
list of available and compatible accessories.
Available accessories
thermodisinfection:
• Adapter for inserts - Ref. P (produced by
Mectron);
• Adapter for handpieces with cord - Ref.
Q (distributed by Mectron).
PIEZOSURGERY® white
accessories that can be ordered separately.
The quantity and type of accessories supplied
with the device you have purchased can vary
according to promotional campaigns and to
the Country where the unit is sold.
The packaging of the device cannot undergo
strong impacts as
components, therefore the transport and the
storage must be carried out with particular care.
Do not stack more boxes in order to avoid
damaging the underlying packaging.
All material shipped by Mectron is controlled
at the time of dispatch.
The device is shipped appropriately protected
and packaged.
Upon receipt of the device, check for any
possible damage caused during transport and
in case any damage and/or defects is found,
complain to the transporter.
Keep the packaging in case there is a necessity
to send any item to a MECTRON Authorized
Service Centre and to store the device during
long periods of inactivity.
WARNING: Before starting to operate
with the device, make sure that you have
stock material (handpiece, inserts, wrenches)
available to use in case the device stops due
to a fault or of inconveniences.
for the
consists of
contains electronic