Identification Data; Identification Plate Of The Device; Identification Data Of The Handpiece; Identification Data Of The Inserts - Mectron COMPACT PIEZO LED Notice D'installation

COMPACT PIEZO LED
02 Û IDENTIFICATION DATA
An exact description of the model and of the serial number of the device will enable our After-
Sales Service to provide fast and efficient support.
Always refer these data whenever you contact an Authorized Mectron Service Center.
EN
02.1 Û IDENTIFICATION PLATE OF THE DEVICE
Every device has an identification plate that
bears the technical characteristics and the
serial number. The identification plate is
located on a side of the control module of the
compact piezo LED. Additional specifications
are reported in this manual (See Chapter 06 -
TECHNICAL DATA).
02.2 Û IDENTIFICATION DATA OF THE HANDPIECE
Each handpiece is laser-marked with the
1 2
Mectron logo (ref. 1), and the handpiece serial
number (ref. 2).
02.3 Û IDENTIFICATION DATA OF THE INSERTS
The following data are laser-marked on each
insert: the name of the insert (ref. 3), the
Mectron logo (ref. 4) and the lot number to
which the insert belongs (ref. 5).
3 4 5
6