Use; Switching The Device On And Off - Mectron PIEZOSURGERY WHITE Mode D'emploi Et D'entretien

Clean the touch keyboard with a soft
cloth with low fiber-release and position
the sterile protective film on the surface
of the clean touch keyboard.
WARNING: The sterile protective
films are supplied inside sterile
packages. Inspect the package to check
its integrity. In case it is damaged, don't
use it and dispose it properly.
5

USE

5.1 Switching the Device On and Off
Switching the Device On
To switch the device on, set the switch
button located on the left side of the
device to position "I", taking care not to
press the foot pedal down during this
stage.
4 symbols light up on the device (ref. U
inside the cover) and progressively switch
off. When this sequence is completed,
the device is set to default parameters
and it is ready to use.
Switching the Device Off
To switch the device off, set the switch
button located on the left side of the device
to position "0", taking care not to press
the foot pedal down during this stage.
The device turns off.
NOTE: every time the device is switched
on, the default settings are applied:
"function" ENDO, "irrigation" 3.
12
USE
on
off
15