Mectron PIEZOSURGERY WHITE Mode D'emploi Et D'entretien page 33

Masquer les pouces Voir aussi pour PIEZOSURGERY WHITE:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

WARNING: Sterile single-use material.
Before surgery. Before using any insert,
check the sterile package integrity. Insert
loses sterility in case of broken or damaged
packaging.
WARNING: The PIEZOSURGERY®
irrigation set is guaranteed for a single
use, only. Separate and dispose of this
kit according to the current regulations
governing hospital waste.
WARNING: Before using the device,
check that the irrigation tube clamps/roller
are open. After surgery, close the clamps/
roller before disconnecting the irrigation kit
from the physiological irrigation bag.
CAUTION: Never force the cord-
handpiece connector into its seat on the
device as the cord-handpiece connector
and/or the device can be damaged. If the
connector cannot be easily fitted into its seat,
probably the connector and its seat do not
correctly match. Ensure that the connector
index point of the cord-handpiece is placed
upwards.
CAUTION: To avoid damaging the foot
pedal cable, connect and/or disconnect it,
holding it by the connector only. Never pull
the cable.
CAUTION: Do not twist or rotate the
foot pedal cable connector when inserting
or removing it. Twisting can damage the
connector.
CAUTION: Check that the
PIEZOSURGERY® handpiece is correctly
connected before using the system.
CAUTION: Intermittent function.
Prolonged use can cause the handpiece to
overheat. Refer to
Chapter 8 on page 28
for average use times (intermittent function).
WARNING: Sterile single-use. Sterile
single-use objects must only be used in a
single surgical operation and for a patient,
only. Single-use objects must not be reused.
Separate and dispose of each single-use
object according to current regulations
governing hospital waste.
WARNING: The device is classified for
intermittent mode operation (as reported
in
Chapter 8 on page 28
use of the device for a prolonged time and
in any case exceeding the declared time
limits can cause overheating, in particular, of
the handpiece. In case of overheating, avoid
contact of the handpiece with the operator
and the patient.
USE
). The continuous
23

Publicité

Table des Matières
loading

Table des Matières