Rapid Heating Function - BORETTI CRG916 Notice D'utilisation

6.6.1 Changing the power level
Each knob has a graduated scale increasing clockwise from level "0" to level
"9". The heating power of the radiant elements is increased by turning any knob
clockwise from "0" position, and is decreased by turning the knob anticlockwise
from the position reached.
The knob's default position corresponds to level "0" (value
display).
i
Turn the knob to set the desired power value (see table in section
"6.2"). Turn the knob to display the actual desired power level, whereas
the one selected with the knob is only indicative.
Turning knob clockwise beyond power level "9" will result in a click and an
audible signal, which will enable the "Booster" function indicated on the display
with the symbol ; then reposition the knob on level "9" (see paragraph "6.6.3").

6.6.2 Rapid heating function

This function enables the required power level to be
reached more quickly, although it remains active for a
very limited period of time. Starting from "0" position, turn
the knob anticlockwise until it clicks and hold it in that
position for 2 seconds; the display will light up showing the
adjacent symbol. You will then have 10 seconds to turn
the knob to the required power level; the display will start
flashing alternating symbol
with the knob.
The following table gives the rapid heating times to the various power levels.
Selected Power
Level
Duration in seconds
with the new power level set
1 2 3 4
48 144 230 312
42
on the relative
5 6 7 8
408 120 168 216
9
-