Traditional Cooking; Changing The Cooking Mode; Changing Temperature; Pre-Heating Phase - BORETTI BPCN 45 Notice D'emploi

9 - Traditional Cooking

EN

Changing the cooking mode

1. During untimed cooking, a cooking pause can be set by
pressing the key.
All the settings of the suspended cooking operation remain
stored and can be reactivated by pressing the same key
again.
2. To change the cooking mode while the oven is working,
press the key and then the
At this point, another cooking mode can be selected from
among those available in the group by means of the arrows
.

Changing temperature

IMPORTANT
• At the end of a function, the display screen shows the
residual compartment heat temperature from the standby
page.
1. From the cooking mode preview display page, the
temperature can be changed by means of the arrows
subsequently confirming by means of the
2. Once cooking has started, the temperature can in any case
be changed, at any time, by means of the arrows
16
, key.
key.
.

Pre-heating phase

While the oven is in pre-heating phase, the instantaneous
temperature is displayed underneath the cooking mode icon.
Just as soon as the set temperature is reached, an acoustic
signal is heard and the instantaneous temperature indication
disappears.