and turn off automatically at the set time.
Proceed as follows:
* Press the push knob 2 times until the
* Turn the push knob clockwise or anticlockwise to increase or decrease the
cooking time; the minutes hand moves in 1-minute stages clockwise or
anticlockwise. The LED
turning the push knob.
i
Confirm the programmer by pressing the push knob (minimum
programming time: 1 minute of cooking).
* An audible alarm will automatically activate. The oven will switch on
immediately and switch off automatically when the set cooking end time
coincides with the current time.
i
To display the set programme, press and release the push knob
(the hands and the LEDs will display the set programme).
* At the end of cooking, the LED
1 minute (press the push knob to deactivate it).
i
To cancel the programme before the end of cooking, press the
push knob for 3 seconds; the programme will be cancelled and
the electronic clock will return to manual cooking mode.
Programming cooking start and end times
Programming the cooking start time enables cooking to start and end
automatically based on the programme.
To programme the cooking start time, proceed as follows:
* Press the push knob once until the
* Turn the push knob clockwise or anticlockwise to increase or decrease the
cooking start time; the minutes hand moves in 1-minute stages clockwise
or anticlockwise. The
turning the push knob.
i
If the push knob is not turned or pressed within 10 seconds, the hands
LED flashes;
will keep flashing for 10 seconds after last
will flash and the alarm sounds for
LED flashes;
LED will keep flashing for 10 seconds after last
32