Traditional Cooking; Changing The Cooking Mode; Changing Temperature; Pre-Heating Phase - BORETTI BPSN 45 Notice D'emploi

Changing the cooking mode

1. During untimed cooking, a cooking pause can be set
by pressing the key. All the settings of the suspended
cooking operation remain stored and can be reactivated by
pressing the same key again.
2. To change the cooking mode while the oven is working,
press the key and then the
cooking mode can be selected from among those available
in the group by means of the arrows

Changing temperature

IMPORTANT
• At the end of a function, the display screen shows the
residual compartment heat temperature from the standby
page.
1. From the cooking mode preview display page, the
temperature can be changed by means of the arrows
subsequently confirming by means of the
2. Once cooking has started, the temperature can in any case
be changed, at any time, by means of the arrows
, key. At this point, another
.
key.
.

11 - Traditional Cooking

Pre-heating phase

While the oven is in pre-heating phase, the instantaneous
temperature is displayed underneath the cooking mode icon.
Just as soon as the set temperature is reached, an acoustic
signal is heard and the instantaneous temperature indication
disappears.
EN
15