Replacing The Adjustable Feet - BORETTI CRG916 Notice D'utilisation

3.2 Replacing the adjustable feet

The cooker comes with standard feet, already installed.
To raise the cooker, you should install feet blocks (optional accessories) to raise
the working height of you cooker to the desired level.
i
Before tilting the cooker over, we recommend removing all the parts
that are not stably attached to it, in particular the cooking hob grids
and burners. To lighten the weight of the cooker, the accessories inside
the oven may also be removed, thereby preventing accidental damage
during the overturning operation.
Proceed in either of the following ways to replace the feet:
A - Lifting the cooker off the floor.
B - Laying the cooker on its back.
Remove the feet from the packing and screw them to the bottom of the cooker.
Make the final adjustment of the feet, to level the cooker to the floor, after
completing the gas and electrical connections.
i Should you need to drag the equipment, tighten the feet all the way and
then adjust them after placing it where expected.
13