Booster Function - BORETTI CFBI9015IX Prescriptions De Montage Et Mode D'emploi

"Booster" function
Turn the control knob clockwise to set the maximum power level (9), then
turn clockwise again to the "P" setting and release the knob (after the
"beep"); the control knob returns to the maximum setting (9) automatically
and the relative maximum setting (9) symbol lights up on the cooking
zone display.
The "Booster" program is now operative.
This function allows the cooking zone to operate at the Booster maximum
power (above the nominal power) for maximum 10 minutes; it could be
used, for example, to rapidly heat up large amount of water.
To disable this function turn the knob anti-clockwise to a lower power level
or to the "0" (Off).
The "Booster" is also disabled by turning the knob again to the "P" setting; in
this case the cooking zone operates at the power level 9.
Note
If a cooking zone is still hot, it is not possible to use the "Booster"
function and will flash if you try to activate. The cooking zone is
automatically set to the maximum power level (9).
The "Booster" function is always limited to a maximum of 5 minutes. You
can activate the "Booster" function again after 5 minutes.
Important notes
The "BOOSTER" function is not suitable for use with non water
based cooking.
Do not use this function for heating oil (e.g. deep fat frying).
223