Battery Settings; Battery Setting - Single Battery Configuration - LEGRAND KEOR XPE Serie Manuel De Fonctionnement

KEOR XPE UPS user manual
Manuel de l'utilisateur de l'ASI KEOR XPE
Utilizzo dell'UPS KEOR XPE

5.4.3 Battery settings

The section for setting the battery parameters assumes a different meaning according to the
battery configuration of the system.
5.4.3.1 Battery setting – Single Battery configuration
If the system is configured as a Single Battery, the screen will appear as below.
Figure 27 – SETTINGS section - BATTERY PARAM. – single battery config. (System)
In this case, the capacity, recharge current and autonomy parameters refer to the single battery
on the entire system.
For example, clicking on the TOTAL CAPACITY control, you access the screen below, where
you can set the capacity of the system battery.
Figure 28 – SETTINGS section – BATTERY CAPACITY – single battery config. (System)
OMAF9213 REV. A 43