Installation and start-up of KEOR XPE UPS
Installation et démarrage de l'ASI KEOR XPE
Installazione e avviamento KEOR XPE UPS
Figure 14 - Basic plant IOBM 1800kVA-2100kVA Distributed battery configuration system and Hot Swap
facilities option
The support base of the IOBM must be designed to support the weight of the device and
guarantee its firm and safe support. The bearing capacity must comply with the static load
Please contact the manufacturer about the weights and the static loads of the IOBM section.
OMAF9212 REV. A
35