Installation et démarrage de l'ASI KEOR XPE
2.2.2 IOBM (KEOR XPE) nominal data
The section of the KEOR XPE system is equipped with an identification plate that outlines
the nominal operating data. The plate is affixed inside the front door.
Figure 2 - Characteristics plate of the KEOR XPE – IOBM
Check the technical characteristics
Before carrying out any installation and start-up operation of the device, check the
technical characteristics are compatible with the AC power mains and with the output
loads.
Installation and start-up of KEOR XPE UPS
Installazione e avviamento KEOR XPE UPS
OMAF9212 REV. A
19