Publicité
Les langues disponibles
Les langues disponibles
6.5
INFORMATION - POWER UNIT
The INFO menu provides general information on the Power Unit; pressing the relevant icon, you
can access the desired section.
Figure 50 – INFO section (Power Unit)
All the data displayed inside the various sections are set by default using the specific interface
software and cannot be edited except by people authorised by the manufacturer.
6.5.1 Device information
The following information is displayed:
• UPS serial number
The serial number of the device assigned by the manufacturer.
• OEM serial number
The serial number of the device assigned by the possible distributor (OEM).
• Hours counter
Data relative to the number of Power Unit operating hours.
6.5.2 Battery information
The page relating to the information on the battery is enabled only if the system is in distributed
battery configuration.
The following information is displayed:
• Capacity
• Recharge capacity
• Autonomy
6.5.3 Firmware versions
The FIRMWARE VERSION menu allows you to display the firmware versions of the Power Unit.
The following information is displayed:
• DSP1 - Rectifier
Rectifier DSP1 firmware version number.
• DSP2 - Inverter
Inverter DSP2 firmware version number.
• uC-SSW
uC-SSW firmware version number.
KEOR XPE UPS user manual
Manuel de l'utilisateur de l'ASI KEOR XPE
Utilizzo dell'UPS KEOR XPE
OMAF9213 REV. A
63
Publicité
Chapitres
